Hook and Loop Backing Pads for Abrasive discs

Backing Pads for Hook and Loop Discs Hook and Loop Velcro Backing Pads for Abrasive discs, suitable for surface conditioning discs and polishing discs. These velcro backing pads come in a variety of diameters including: 100mm 115mm 150mm 200mm 50mm All of these velcro backing pads have an M14 thread. The threads of an M14-2.0 screw, which is coarse, are spaced 0.079 inches (2.0 mm). A 9/16-12 screw, which is comparable in diameter and is also coarse, has its threads spaced 0.083 inches, which are farther apart, so there will be fewer threads per unit of measure (we used an inch in the table above). If you need a self-adhesive backing pad take a look here. These also come with a M14 thread. Surface Conditioning Discs are for surface finishing, turbine blade smoothing, weld blending, paint and burr removal. They come in Extra Coarse (Black), Coarse (Brown), Medium (Red) and Fine (Blue). 115 x 22 mm Centre Hole. The centre hole centralises the pad and stops it moving during use. Ideal to use with an Angle Grinder for Stainless Steel and Aluminium. See our range here.  Foam backed abrasive discs. Aluminium oxide grit on a bed of foam with a hook and loop underside. Available in various diameters and grits. Use with these hook and loop disc holder in the appropriate size. These discs are long lasting and suit contoured surfaces. To see our finishing and polishing videos take a look at our you tube channel.