Large Reinforced Angle Brackets 154×152.5x65x2.5mm

Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses. Material Pre-galvanised mild steel. Benefits Reinforced. Multiple applications. APPLICATION Suitable On Supporting member: solid wood, glued-laminated wood, concrete, steel, etc. Supported member: solid wood, composite lumber, glued-laminated wood, triangular trusses, profiles, etc. When to Use Fastening of small trusses. Cladding plates, cladding uprights. Rafter anchors, cantilevers, headers, etc. INSTALLATION Fixing On wood: CNA annular ring-shank nails dia. 4.0 x 35 or dia. 4.0 x 50 mm. CSA screws dia. 5.0 x 35 mm or CSA screws dia. 5.0 x 40 mm. Bolts. LAG screws. On concrete: Concrete substrate Mechanical anchor: WA M10-78/5 OR WA M12-104/5 pin. Chemical anchor: AT-HP resin LMAS M10-120/25 Hollow masonry substrate: Chemical anchor: AT-HP or POLY-GP resin LMAS M10-120/25 threaded rod SH16x130 screen. On steel: Bolts. Installation Locate onto joist. Install nails. It can be also screwed. If the header is made out of timber, the angle bracket can be attached to it with nails or screw. If the header is made out of concrete, the angle bracket must be attached with adapted anchors (using the installation data from the anchor).